TM 10-4610-239-24
TM 08580B-24/3
2-127. REPLACE R.O. PUMP ASSEMBLY OIL GAGE.
This task covers:
a. Removal.
b. Installation.
INITIAL SETUP.
a.
Tools. Tool Kit (Appx B, Sect III, Item 10).
b.
Materials/Parts.
Oil, Lubricating (Appx C, Sect II, Item 11).
Antiseize Tape (Appx C, Sect II, Item 17).
c.
Equipment Condition.
Power shut down (power source manual).
ROWPU shut down (TM 10-4610-239-10).
Oil drained from R.O. pump assembly (LO 10-4610-239-12).
a.
Remove vent cap (1) and rubber washer (2) from oil gage (3).
b.
Remove sight glass (4) and rubber washer (5) from sight tube (3).
c.
Remove sight tube (3) from elbow adapter (6).
d.
Remove elbow adapter (6), nipple (7), pipe elbow (8), and nipple (9) from R.O. pump assembly (10).
2-308
