TM 10-4610-239-24
TM 08580B-24/3
ALIGNMENT. (Cont)
r.
Tighten three screws (1) and three bolts (5).
s.
Repeat steps n through q. When distances are the same, tighten setscrew (9).
t.
Repeat steps n through p. If distances are not the same, loosen setscrew (9), slide otor hub (8)
m
and motor sheave (7) on shaft until distances are the same, then tighten setscrew.
u.
Install R.O. pump assembly belts. (Refer to paragraph 2-121).
2-318
