TM 10-4610-239-24
TM 08580B-24/3
3-3. TROUBLESHOOTING TABLE . Table 3-1 lists common malfunctions which may be found during operation or
maintenance of the ROWPU group or its assemblies. Perform the tests/inspections and corrective actions in the order
listed.
NOTE
This manual cannot list all malfunctions that may occur, nor all tests or inspections and
corrective actions. If a malfunction is not listed or is not corrected by listed corrective
actions, notify your supervisor.
Table 3-1. Direct Support Troubleshooting
Malfunction
Test or Inspection
Corrective Action
SUSPENSION ASSEMBLY
1.
FLATBED CARGO TRAILER SIDETRACKS WHEN BEING TOWED
Step 1.
Check for worn or broken spring leaves.
If spring leaves are good, go to step 2.
If spring leaves are worn or broken, replace both sprng assemblies. Refer to paragraph 3-8.
i
Step 2.
Check for worn or broken trunnion brackets.
If trunnion brackets are good, go to step 3.
If trunnion brackets are worn or broken, replace trunnion axle. Refer to paragraph 3-4.
Step 3.
Check for bent trunnion axle.
If trunnion axle is bent, replace trunnion axle. Refer to paragraph 3-4.
If trunnion axle is not bent, notify General Support Maintenance.
3-4
