TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
d.
Remove four nuts (2), lockwashers (3), and bolts (4) and remove trunnion clamp (5).
e.
Remove four Allen screws (6) and remove upper and lower ring clamps (7).
f.
Jack flatbed cargo trailer until trunnion mount (8) clears trunnion axle (1) being careful not to
pull air chamber lines (9) loose.
INSTALLATION.
NOTE
Both ends of the trunnion axle are installed the same. One is shown.
a.
Install two upper and two lower ring clamps (7) and four screws (6).
b.
Lower flatbed cargo trailer until trunnion mount (8) ress on trunnion axle (1).
t
c.
Install two trunnion clamps (5) and eight bolts (4), eight lockwashers (3), and eight nuts (2).
d.
Torque bolts (4) to 80-105 pound-feet (59.04-77.49 N.m).
e.
Lower flatbed cargo trailer to normal operating position. Refer to TM 10-4610-239-10.
3-76
