TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
i.
Working inside electrical junction box, cut wire ties containing wires between sealing grip (20) and motor controller
K7 (21).
NOTE
Tag all wires before removal.
j.
Remove three screws (22), three lug washers (23), and three wire lugs (24) from bottom terminals of motor
controller K7(21).
k.
Loosen nut (25).
l.
Remove locknut (26) and O-ring (27). Discard O-ring.
3-212
