TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
CAUTION
WARNING
Movement of trailer without proper
LEVELING
JACK
IS
SPRING
positioning of jacks will result in
LOADED.
USE CARE WHEN
damage or destruction of jacks.
PULLING OUT LEVELING JACK TO
PREVENT PERSONAL INJURY.
6. WITH CRANK HANDLE (7) IN POSITION ON
7. TO ROTATE FRONT LEVELING JACK TO
FRONT JACK (9), TURN CRANK HANDLE
HORIZONTAL POSITION, REMOVE CRANK
COUNTERCLOCKWISE AND FULLY RAISE
HANDLE. GRASP JACK AND PULL STRAIGHT
JACK PAD (20).
OUT AGAINST SPRING TENSION. ROTATE
JACK UP TO HORIZONTAL POSITION. ALLOW
JACK TO SPRING BACK TO LOCKED
POSITION.
8. POSITION CRANK HANDLE (7) ON FRONT
JACK (9) AND TURN HANDLE CLOCKWISE TO
EXTEND JACK PAD (20). LINE UP HOLES IN
JACK PAD WITH ROUND BAR (21) ON
SECUREMENT PLATE (22).
EXTEND JACK
UNTIL JACK PAD RESTS FIRMLY AGAINST
9. REPLACE CRANKHANDLE (7) ON REAR OF
SECUREMENT PLATE.
JACK SUPPORT RESTS FIRMLY AGAINST
SECUREMENT PLATE. BRACKET (8); INSTALL
SAFETY PIN (6).
FIGURE 2-76. PREPARATION FOR MOVEMENT (SHEET 4 OF 7) (ARMY)
2-87
