TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
3-45.
CONTROL BOX ASSEMBLY MAINTENANCE - continued.
TOGGLE SWITCHES.
NOTE
There are 11 toggle switches. The number of wires attached to each switch
may vary depending on use. All switches are removed the same. One is
shown
Tag all wires before removal.
a.
Remove 14 screws (4), lockwashers (3), and flat washers (2). Lower control box cover (1).
b.
From inside control box assembly, remove screws (17) and remove wires (18).
c.
From front of control box assembly, remove mounting nut (13) and lockwasher (14).
d.
Remove locking (15) and switch body (16).
e.
Install control box cover (1) and install but do not tighten 14 screws (4), lockwashers (3), and flat washers (2).
EMERGENCY STOP SWITCH.
NOTE
Tag all wires before removal.
a.
Remove 14 screws (4), lockwashers (3), and flat washers (2) Lower control box cover (1).
b.
Remove cap (12), locknut (11), keyway washer (10), and fiber washer (9) from switch body (7).
c.
Loosen two screws (5) tag and remove wires (6).
d.
Remove switch body (7) and rubber washer (8).
e.
Install control box cover (1) and install but do not tighten 14 screws (4), lockwashers (3), and flat washers (2)
3-248
