TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
3-45. CONTROL BOX ASSEMBLY MAINTENANCE - continued.
RECEPTACLE CONNECTORS.
e.
Remove four nuts (6), lockwashers (5), flat washers (4), and screws (15).
f.
Remove receptacle connector (2) and gasket (1).
NOTE
To unsolder wires from receptacle connectors, it may be necessary to remove
wiring harness clamps for access.
Tag wires with pin connection before unsoldering.
g.
Using soldering gun, unsolder wires (3) from receptacle connector (2) and remove receptacle connector.
h.
If working on control box assembly, install control box cover (14) and install but do not tighten 14 screws
(13), lockwashers (12), and flat washers (11).
3-253
