TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
3-45.
CONTROL BOX ASSEMBLY MAINTENANCE - continued.
INDICATOR LAMPHOLDERS.
NOTE
There are nine lampholders. All are removed the same. One is shown.
Tag all wires before removal.
a.
Remove 14 screws (3), lockwashers (2), and flat washers (1). Lower control box cover (4).
b.
From inside control box assembly, remove two screws (14) and three wires (13) from lampholder (9).
c.
Remove nut (5) and lockwasher (6).
d.
Remove lampholder (9) and rubber washer (8) from front of control box (7).
e.
Remove lens (12), flange (10), and bulb (11).
f.
Install control box cover (4) and install but do not tighten 14 screws (3), lockwashers (2), and flat washers (1).
3-250
