TM 10-4610-241-10
TO 4OW4-13-41
3-12.
TIRE AND WHEEL ASSEMBLY SERVICING (MODELS WPES-10 AND
H-9518-1) - cont.
(5)
If rear tire and wheel (2) will be removed, lower both rear leveling jacks (10) until rear
tires are off ground (figure 2-18).
(6)
Using lugnut wrench and handle, remove lugnuts (3 through 8) from studs (11).
WARNING
Tire and wheel weigh about 122 pounds (55.39 kg). To prevent injury to
personnel, use two people to remove tire and wheel from hub. Place block
or lug wrench under tire before removing wheel.
To prevent damage to the equipment, do not drag tire and wheel across
threads of studs.
(7)
Remove defective tire and wheel (11) from from hub (12).
Figure 3-14. Tire and Wheel Replacement.
Change 2 3-45
