Item No. 22 23 Interval After After TM  10-4610-241-10 TO   40W4-13-41 Table  2-2.  Operator  Preventive  Maintenance  Checks  and  Services Location Item To Check/ Service Backwash  System Product  Water System Procedure d. Inspect Hoses for tears, cuts, signs  of  dry  rot  and  missing  gaskets. Not  Fully  Mission Capable If: Tears,  cuts,  signs  of  dry  rot or  missing  gaskets e. Inspect Strainer and Fittings for damaged  gaskets,  corrosion  and cracks. Damaged   gaskets, corrosion or cracks f. Inspect Float for dents, cracks, punctures  and  corrosion. Float cracked or punctured a.  Check  Backwash  Pump  frame, pump  body  and  strainer  for  cracks, corrosion  and  loose  or  missing hardware. Cracks, corrosion or loose or missing hardware b.  Inspect  for  cut,  tom  or  burned Electric  Power  Cable  cut, Electrical  Power  Cable. tom or burned c.  Inspect  Pump  Electric  Motor  for debris  blocking  cooling  slots Debris blocking cooling slots or signs of discoloration d.  Inspect  Hoses  for  tears,  cuts,  signs of  dry  rot  and  missing  gaskets. Tears,  cuts,  signs  of  dry  rot or  missing  gaskets e.  Inspect  Fittings  for  damaged gaskets,  corrosion  and  cracks. Damaged   gaskets, corrosion or cracks f.  Inspect  Tank  in  accordance  with TM5-5430-225-12&P. In accordance with TM5-5430-225-12&P a.  Check  Distribution  Pump  frame. pump  body  and  strainer  for  cracks, corrosion  and  loose  or  missing hardware. Cracks.  corrosion  or  loose or missing hardware b. Inspect for cut, tom or burned Electrical  Power  Cable. Electric  Power  Cable  cut, tom or burned c.  Inspect  Pump  Electric  Motor  for debris  blocking  cooling  slots Debris blocking cooling slots or signs of discoloration d.  Inspect  Hoses  for  tears,  cuts,  signs of  dry  rot  and  missing  gaskets. Tears,  cuts,  signs  of  dry  rot or  missing  gaskets e.  Inspect  Fittings  for  damaged gaskets,  corrosion  and  cracks Damaged   gaskets, Corrosion  or  cracks 2-33