Item
No.
8
9
10
11
12
Interval
During
Waste Water
System
During
Generator Set
During
Control Panel
During
Boost Pump
During
RO PUMP
Location
Item To Check/
Service
TM 10-4610-241-10
TO 40W4-13-41
Table 2-2. Operator Preventive Maintenance Checks and Services
Procedure
Not Fully Mission
Capable If:
f. Check Nozzle for leaks and proper
operation.
a. Check Vent Vessels Line for leaks.
b. Check Waste Line for leaks.
See TM 5-6115-465-12
Steady Stream of Water
Steady Stream of Water
In Accordance with
TM 5-6115-465-12
a. Inspect Panel Light and Indicator
Lights for proper operation.
b. Inspect TSD Monitor for proper
operation (Use TDS Meter).
c. Inspect Vents, Valves and drains for
Vents, valves or drains inoperable.
smooth operation and leaks.
d. Inspect gages for proper operation.
Gages inoperable.
e. Check for loose or disconnected
Power Cable. Reconnect and tighten as
required.
ROWPU INTERIOR
a. Inspect Boost Pump Motor for
discoloration and excessive noise.
b. Inspect Pump and Connectors for
leaks.
Steady stream of water
c. Inspect Pump for cracks, corrosion
and loose or missing mounting
hardware.
Missing mounting hardware or
cracks in pump
a. Inspect Pump Motor for
discoloration and excessive noise.
b. Inspect Pump and Connectors for
leaks.
Steady stream of water
2-29
