TM 10-4610-241-24
TO 40W4-13-42
3-40. STROKE ADJUSTMENT ASSEMBLY (CHEMICAL FEED PUMP) REPLACE.
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Tool Kit - 260246
Materials/Parts Required
Solvent, Drycleaning (Appendix C, Section II, Item 18)
Detergent (Appendix C, Section II, Item 5)
Compound, Locking (Appendix C, Section II, Item 5)
Gaskets and Packing (TM 10-4610-241-24P)
Lockwashers (TM 10-4610-241-24P)
Equipment Condition
Reference
Chemical Feed Pump removed (Paragraph 2-60).
Chemical Feed Pump Electric Motor removed (Paragraph 2-62).
Chemical Feed Pump Liquid Heads removed (Paragraph 2-61).
a.
Removal.
NOTE
There are four stroke adjustment
assemblies on the chemical feed pump.
All are removed in the same manner.
One is shown, the others are similar.
(1)
Remove plug (1) and drain oil from pump
housing (9) (Paragraph 2-60).
(2)
Remove four screws (2), drive housing (3)
and gasket (4) from pump cover (7).
(3)
Remove sixteen screws (5) and
lockwashers (6).
(4)
Remove cover (7) and gasket (8) from
pump housing (9).
3-223
