TM 10-4610-246-13
4.18 MAINTENANCE OF MANIFOLD ASSEMBLY.
This task covers:
a.
Removal
c.
Repair
e.
Installation
b.
Disassembly
d.
Assembly
INITIAL SETUP:
Tools
Equipment Conditions
Tool Kit, General Mechanics
Inlet pipe assembly disconnected (para. 4.16).
(Item 1, App. B)
Outlet pipe assembly disconnected (para. 4.17).
Parts/Materials
Lockwasher (TM 10-4610-246-23P)
Gaskets (TM 10-4610-246-23P)
a.
Removal.
(1)
Remove two hexnuts (1), two lockwashers (2), and two flat washers (3).
(2)
Remove U-bolt (4) and two flat washers (5).
NOTE
End of manifold must be supported for ease of hardware removal.
Figure 4-5. Manifold Assembly
4-13