TM 10-4610-246-13
4.18 MAINTENANCE OF MANIFOLD ASSEMBLY - (Cont)
Figure 4-6. Manifold Disassembly
Do not overtighten nuts or damage to flanges will occur.
(6) Install six flat washers (5), six capscrews (4), six flat washers (3), six lockwashers (2) and six hex nuts (1). Hand
tighten.
e.
Installation.
(1) Position manifold assembly (11, Figure 4-5) onto brackets (13 and 14).
(2) Install two flat washers (10), two capscrews (9), two flat washers (8), two lockwashers (7) and two hex nuts (6).
Hand tighten.
Do not overtighten or damage to manifold flanges will occur.
4-15
