ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0029 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
OPERATOR INSTRUCTIONS
PREPARATION FOR MOVEMENT MARINE CORPS UNIT
11. Attach a 10-ft. ratchet strap to the MF feed pump skid and route it over the distribution tank (see
Figure 18). Secure the other end around the pipe between manual valve V-212 and Strainer S-4.
a. Tighten the strap so that the tank does not stick out beyond the front of the MF feed
pump skid.
b. Wrap the strap end around the metal ratchet to protect the tank from the ratchet.
12. Pack the following items behind and on top of the distribution tank (see Figure 18):
Tripod assembly
Two 2 x 5 product water suction hoses (not visible in Figure 18)
3 x 3 MF suction hose (not visible in Figure 18)
5/8-in. x 50-ft. auxiliary hose assembly P06
Floating inlet strainer
6 in. x 50 ft., red-banded waste discharge hose
4-in. x 5-ft., red-banded cleaning suction hose
Three 3-in. x 10-ft., green-banded raw water suction hoses
13. Attach the long section of two 10-ft. ratchet straps to the skid frame, route them over the packed-
out items, and attach the other ends to the MF feed pump frame (see Figure 18).
14. Attach the long section of a 10-ft. ratchet strap to strainer S-2, route it in front of the fuel can and
the MF feed pump skid frame, and attach the other end to the pump skid frame (see Figure 18).
15. Wrap the ratchet strap ends around the metal ratchet to protect the tank from the ratchet.
6 X 50 WASTE DISCHARGE HOSE
4 X 5 CLEANING SUCTION HOSE
2 X 5 PRODUCT WATER SUCTION HOSES
3 X 3 MF SUCTION HOSE
AUXILIARY HOSE
RATCHET STRAPS
FLOATING INLET STRAINER (HIDDEN)
TRIPOD (HIDDEN)
3 X 10 RAW WATER SUCTION HOSES
STRAINER
S-2
MF FEED PUMP SKID
RATCHET STRAPS
Figure 18. Equipment Area Packout 5.
0029 00-30
