ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
0038 00
OPERATOR MAINTENANCE PROCEDURES
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Table 1. Preventive Maintenance Checks and Services (PMCS).
ITEM
INTERVAL
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
NOT READY IF:
CHECKED OR
SERVICED
40
After
MF Feed Tank
Check fabric for holes and tears. Discard and order BII
Strainer S-1
replacement if damaged (WP 0040).
41
After
MF Feed
Remove, inspect, and clean (WP 0040).
Basket Strainer
S-2
42
After
Air compressor
Inspect for loose or missing mounting hardware.
Guard is loose or
belt guard
damaged.
43
After
Air compressor
Check oil level. Add oil if needed.
Insufficient oil.
oil level
44
After
Interior
Check for cuts, loose connections/damaged connectors.
Damage that
electrical
would prevent
cables
operation.
45
After
Eyewash bottle
Check that at least one bottle is full and unopened and
Both bottles
has not exceeded the expiration date.
empty or past
expiration date.
46
After
Portable heater
Inspect for debris or tears. Clean out any debris.
ducts
Replace the ducts if torn beyond usability.
47
After
Hose heating
Inspect exposed cable and connectors for damage.
blankets.
Notify Direct Support for connector replacement. Replace
blanket if cable damaged.
Inspect for tears. Notify Direct Support if blankets need
repair (WP 0072). Replace blanket if needed.
48
After
Pump heating
Inspect for damage. Replace if needed.
collars
49
After
Fabric wall (A-
Inspect fabric, hook and loop material, buckles and straps
TWPS) and
for damage. Notify Direct Support if repair needed
Cold Weather
Cover (MC-
TWPS)
50
After
Frame tie down
Inspect for damage. Notify Direct Support if any damage
and lift
is found that may affect the integrity of the components.
provisions
Do not use damaged components.
51
After
(A-TWPS only)
Inspect for damage. Notify Unit Maintenance for repairs if
Flat rack
needed (WP 0065).
latches and
seals
0038 00-6
