ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0060 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
UNIT MAINTENANCE PROCEDURES
OPERATING CONTROL SYSTEM SUB PANEL
1. Open the cover to the OCP (see Figure 1).
2. Remove the 14 screws that secure the OCP and swing the instrument panel open.
3. Remove an analog output module as follows (see Figure 5):
a. Locate the analog output module inside the 13-slot chassis that is to be replaced.
CAUTION
Electronic components are sensitive to electrical static. Discharge any electrical
static before handling. Failure to do so may damage the components.
b.
Touch any metal portion of the TWPS chassis to discharge any electrical static.
c.
Open the compartment door of the module.
d.
Pull the lower terminal block with its connected wiring off the module.
e.
With one hand on each end of the module, press the release tabs and evenly pull the
module out of the 13-slot chassis.
SW1
LOWER
TERMINAL BLOCK
ANALOG OUTPUT MODULES
OPERATING CONTROL
SUB-PANEL
Figure 5. Analog Output Module Replacement.
0060 00-8
