ARMY TM 10-4610-309-14
MARINE CORPS TM10802A-14/1
0065 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
UNIT MAINTENANCE PROCEDURES
FLAT RACK AND TACTICAL QUIET GENERATOR
Seal Replacement:
Parts (TM 10-610-309-24P):
Seal, channel, flat rack
Seal, self-adhering, flat rack
Seal, flat, flat rack
Equipment Condition:
This procedure can be performed regardless of the condition of the TPWS
1. Replace flat rack channel seals as follows (see Figure 2):
a. Pull the old seal off the flat rack.
b. Cut new seal to length from bulk.
c. Press the new seal in place.
CHANNEL SEAL
Figure 2. Flat Rack Channel Seal Replacement.
2. Replace flat rack self-adhering seals as follows (see Figure 3):
a. Note the orientation of the existing seal.
b. Pull the old seal off the flat rack.
c. Cut new seal to length from bulk.
d. Orient the seal where it is to be installed on the flat rack.
e. Remove the protective paper strip from the seal.
f. Press the adhesive side of the seal to the TWPS surface.
SELF-ADHERING SEAL
Figure 3. Flat Rack Self-Adhering Seal Replacement.
0065 00-3
