ARMY TM 10-4610-309-14
MARINE CORPS TM10802A-14/1
0065 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
UNIT MAINTENANCE PROCEDURES
FLAT RACK AND TACTICAL QUIET GENERATOR
c.
Separate the three different size bolts that are used to secure the middle of the bail bar to
the diagonal beam of the flat rack and the top of the bail bar to the top horizontal flat rack
beam (see Figure 8).
d. Loosely secure the top part of the bail bar to the front of the top horizontal flat rack beam
using the seven short bolts with their lock washers and flat washers. Do NOT tighten yet.
e. Loosely secure the top part of the bail bar to the underside of the top horizontal flat rack
beam using the four longer bolts with their lock washers and flat washers. Do NOT
tighten yet.
f. Secure the middle of the bail bar to the diagonal flat rack beam of the using the four
longest bolts with eight flat washers, four lock washers, and four nuts.
g. Tighten all 15 bolts. Torque to 250 in-lbs.
TOP HORIZONTAL FLAT RACK BEAM
SHORT BOLT
LONGER BOLT
LONGEST BOLT
DIAGONAL FLAT RACK BEAM
Figure 8. Correct Bail Bar Bolt Installation Locations.
END OF WORK PACKAGE
0065 00-8
