TM 10-4610-310-14
0008 00
RAW WATER PUMP SETUP
CAUTION
All hose connections must be free of debris and foreign material. The material may be
ingested into the piping system. Failure to follow this precaution may result in damage to the
service pump that may render the LWP inoperable.
Make sure that hose connections are free of debris before connecting to the LWP to avoid damage to the LWP.
Fill the bucket from the BII with source water. Rinse each connection before assembly. See Figure 11.
Figure 11. Cleaning Hose Connections.
1. Connect two sections of raw water hoses (grey).
2. Attach the raw water intake strainer (410 microns) to the raw water hoses (grey) on the end. See Figure 12.
3. Attach the other end of the raw water hoses (grey) to the suction fitting of the raw water pump. See Figure 8.
ANCHOR
410-MICRON
STRAINER
TO RAW
WATER
HOSES
Figure 12. Raw Water Intake
Strainer.
