TM 10-4610-310-14
0009 00
SETUP - continued
5. Connect a section of fabric hose (green) to the discharge port of the booster service pump. See Figure 2
and Table 1.
Table 1. Hose Descriptions.
DESCRIPTION
CONNECTION
DIMENSIONS
QTY.
NOTE
Rubber hose with
Used to pipe the water from the
1-1/2 inch
2 EA.
Have stainless
(Grey) band
source to the raw water pump.
diameter, 25 feet
steel camlocks.
long
Fabric hose with
Used to pipe the water from the raw
3/4 -inch
3 EA.
Only fabric hoses
(Green) band with
water pump to the settling tank and
diameter, 25 feet
that are 3/4 -inch
polypropylene
from there, to the UF module.
long
size.
camlocks
Black rubber hose
Used to dispose the reject/brine
3/4 -inch
2 EA.
Has brass female
with (Red) band
from the UF and RO modules
diameter, 50 feet
camlocks on both
long
ends
Rubber hose with
Used to pipe the water from the UF
3/4 -inch
2 EA.
Only rubber hoses
(Yellow) band and
filtrate tank to the BACKWASH
diameter, 10 feet
that are 3/4 -inch
polypropylene
pump and from there to the
long
size.
camlocks.
backwash inlet on the UF module
Rubber hose with
Used to pipe the water from the UF
1-inch diameter,
1 EA.
Only rubber hose
(Orange) band and
filtrate tank to the HP module inlet.
12 feet long
with female
polypropylene
camlocks on both
camlocks.
ends.
High-Pressure
Used to pipe the water from the HP
1/2 -inch
1 EA.
Braided stainless
hose
module outlet to the RO module
diameter, 14 feet
steel hose with
inlet.
long
clear abrasion
guard sleeve.
Rubber hose with
Used to pipe the permeate from the
1 -inch diameter,
3 EA.
Only rubber hoses
(white) band and
RO module to the chemical module
10 feet long
that are 1 -inch
polypropylene
and from there to the product tank.
size.
camlocks.
NBC cartridges can be assembled
between the chemical module and
the product tank by using these
hose.
Fabric hose with
Used to pipe the water from the
1 -inch diameter,
1 EA.
Only fabric hose
(Blue) band and
distribution pump to the nozzle.
25 feet long
that is 1 -inch size.
polypropylene
camlocks.
