TM 10-4610-310-14
0018 00
LOADING THE HMMWV continued
23. Load the upper and lower service pump module skids on the right wheel well of the HMMWV. Load the
upper and lower skids independently of each other. Insert lock pins into appropriate holes in skid frames.
Secure skids together with lock pins. See Figure 14.
SOME DETAILS
SERVICE
REMOVED FOR
PUMP SKIDS
CLARITY.
Figure 14. Loading Service Pumps Skid.
24. Load all LWP water hoses in the HMMWV cargo compartment. Make sure the couplers are mated. Place in
between the modules to prevent shifting.
25. Mate the two ends of strap (3) over the fabric tanks and ratchet them down. See Figure 15.
26. Bring the straps (1) and (2) over the modules and secure the hooks on the rings at the end of the cargo bed.
27. Disconnect the ramp from the vehicle and fold it down.
28. Load the ramp and hand truck on the left wheel well and secure with straps (4) and (5). Loop the ends of the
straps around the module frames and onto itself. See Figure 15.
FABRIC
TANKS
Figure 15. HMMWV Loaded with LWP.
