TM 10-4610-310-14
0045 00
SAMPLE VALVE REMOVAL continued
4
5
6
7
1
2
3
PERMEATE
OUTLET
Figure 2. RO Element Piping Layout.
2. Loosen the nut on the sample valve piping. Remove only the piping necessary to remove the sample valve.
3. Ensure not to loose the inserts inside the nuts.
4. Unthread sample valve from end cap.
5. Remove the sample valve from the end of the pressure vessel end cap.
6. Remove the old anti-seize tape from the threads
RO ELEMENT REMOVAL
See Figure 3 for the pressure vessel 1 piping configuration and Figure 4 for pressure vessels 2 through 7.
INLET PIPING
NIPPLE
Figure 3. Pressure Vessel 1.
