TM 10-4610-310-14
0045 00
REMOVAL
1.
Only the pressure vessel number 7 contains the simulator with a hole in it. See Figure 9.
SIMULATOR W/ HOLE
RO PRESSURE VESSEL
END CAP
O-RING
RETAINING RING
Figure 9. Pressure Vessel 7 With Simulator.
2.
Pressure vessel 1-6 contains simulators without holes. Figure 10.
SIMULATOR WITHOUT
HOLE
RO PRESSURE
VESSEL
END CAP
O-RING
RETAINING RING
Figure 10. Pressure Vessels 1-6 With Simulator.
3.
Turn end cap over.
4.
The RO simulator is now visible and ready for removal from the end cap.
5.
Remove the simulators from end caps.
6.
Store the simulators inside the instrument kit in the BII box.
7.
Install end caps and sampling valves. See WP 0045 00.
