TM 10-4610-310-14
0065 00
MALFUNCTION
TEST/INSPECTION
CORRECTIVE ACTION
Broken or worn bearing.
Replace bearing (WP 0125 00)
6. Knocking noise
Check the key on the shaft (WP 0098
Loose crankshaft
Check for air entering through
Tighten connections. Apply new thread
loose connections
tapes if necessary.
Clean out foreign material or install new
Stuck inlet/discharge valves
7. Pump runs rough
valve kit (WP 0125 00).
Leaking hi-pressure or lo-
Install new seal kit. (WP 0125 00).
pressure seals
END OF WORK PACKAGE
0065 00-2
