TM 10-4610-310-14
UNIT MAINTENANCE
LIGHTWEIGHT WATER PURIFIER
CHEMICAL MODULE PIPING
REMOVAL/INSTALLATION
INITIAL SETUP
Tools
Equipment Condition Required
Tool Kit, General Mechanics, Automotive
All equipment de-energized.
All switches in off position
Material/Parts
Rags, cotton, (item 21, WP 0136 00)
Flowmeter, (PN F-46030LX-08K)
GENERAL
This work package contains information and instructions for removal and installation of the product piping,
cleaning tank outlet piping and chemical tubing on the chemical module used in the Lightweight Water Purifier
(LWP).
REMOVAL
Sampling Hose
1. Ensure that the LWP is completely shut down. See WP 0013 00.
2. Remove sampling hose (3) by loosening hose clamp (2). See Figure 1.
3. Note the location of product outlet spool piece (1) and product inlet spool piece (4).
SOME
DETAILS
OMITTED
FOR
CLARITY
Figure 1. Product Water Sampling Hose.
