TM 10-4610-310-14
0131 00
INSTALLATION - continued
1.
Install the terminal block inside junction box assembly on mounting rail. Install the bottom end first and
then snap the top portion in. Secure with end stops on mounting rail.
2.
Position the junction box assembly on the module. Secure with four machine screws, flat washers, and
new lock nuts.
3.
Begin routing wiring through hubs.
4.
Connect wiring to terminals on terminal block. Reuse the wire number tags from the old wires. Refer to
Figure 4.
5.
Install cover on junction box assembly. Secure with four screws.
Figure 4. Chemical module Wiring Diagram.
END OF WORK PACKAGE
0131 00-3 / 4 blank
