TM 10-4610-310-14
0130 00
ASSEMBLY - continued
30. Firmly press pump sleeve (38) until it snaps into position over O-ring (32) against motor stool (2).
31. Make sure the discharge port is in the same direction before disassembly, preferably up.
32. Install clamp (39) around pump sleeve (38) and motor stool (2). Secure with screw (40) and nut (41).
33. Remove the service pump from the shaft holder.
34. Make sure the rotor (7) shaft rotates freely.
END OF WORK PACKAGE
0130 00-7 / 8 blank
