Removal of mounting plate (39) will necessitate re-timing of engine ignition.
(e)
(f)
(g)
(h)
(i)
TM 3-4230-218-30&P
Install flywheel puller on fan (9) with extender nuts and
bolts provided.
Remove fan (9) and flywheel (8) as a unit.
Remove key (18).
Remove three bolts (6) and washers (7).
Separate fan (9) from flywheel (8).
Remove screws (5), washers (4), and cover (3). Remove
nut (26), washer (25), and three leads from capacitor
(23). Remove capacitor (23).
Remove screw (30), washer (31), and contact set (35) from
mount plate (39).
Remove two screws (29), two washers (28), and coil (27)
from mount plate (39). Pull coil from mount plate and tag
and disconnect coil lead.
Remove two screws (22), two washers (21), and coil (20).
Unscrew spark plug lead (19) from coil (20).
NOTE
(j)
Remove two screws (36), two lockwashers (37), two wash-
ers (38), and mount plate (39). Remove ring (40) and
felt washer (41) from engine shaft (42).
2-29
