TM 3-4230-218-30&P
b.
Clutch Assembly.
(1) Removal.
(a)
(b)
(c)
Remove four nuts (1), four lockwashers (2), and four
bolts (8).
Tap edges of housing (3) to loosen seal.
Once seal is broken, twist clutch assembly (3) back
and forth to remove from engine.
Remove engine fan cover and starter carrier (page 2-28).
Install crankshaft retainer (figure D-1, Appendix D) on
three screws extending from engine fan.
Secure with
three nuts.
Remove nut (4), and lockwasher (5). Use clutch puller
and extender nut bolts to remove clutch (6) and key (9)
from crankshaft (7).
2-33
