TM 3-4230-218-30&P
2-8.
GASOLINE ENGINE ASSEMBLY - Continued.
b.
Clutch Assembly - Continued.
(2)
(3)
(4)
Inspection.
(a) Inspect the hardware for stripped threads. Replace if
defective.
(b) Inspect inner surface of clutch drum for cracks, scoring,
and chipped surfaces.
Replace drum if any play exists or
bearing roughness is noted.
(c) Inspect housing for cracks, elongated holes, and for
damaged finish.
Replace housing if defective.
(d) Inspect clutch for worn friction surface or irregularities.
Repair.
Repair is limited to the replacement of damaged components.
Installation.
(a) Install key (9) and clutch (6) on crankshaft (7).
(b) Install lockwasher (5) and nut (4). Torque nut (4) to
32.5 lb-ft (390 lb-in).
(c) Remove crankshaft retainer from engine fan.
(d) Install starter carrier and engine fan cover (page 2-27).
(e) Install a bead of locking compound (item 2, Appendix C)
to the housing (3).
(f) Install housing (3) with indentation facing up, four bolts
(4), four lockwashers (2), and four nuts (1).
(g) Install fan assembly onto engine (page 2-27).
(h) Install engine and fan assembly (page 2-24).
2-34