TM 3-4230-218-30&P
2-8.
GASOLINE ENGINE ASSEMBLY - Continued.
c.
Cylinder Assembly - Continued.
(1) Removal - Continued.
(d) Remove four nuts (4), four lockwashers (5), cylinder
(16), and
gasket (6).
Discard gasket (6).
(e) Install piston retainer tool (Appendix D) between piston
(9) and crankcase.
(f) Remove two circlips (11).
NOTE
Mark position of piston in reference to cylinder.
(g) Using wrist pin removal tool (Appendix D), remove wrist
pin (10) and piston (9). Remove bearing (19).
CAUTION
Be careful that plates (18) do not fall into engine housing when removing
piston.
NOTE
Remove piston rings (7 and 8) only if damaged.
(h) Remove upper piston ring (7) and lower piston ring (8).
2-36
