TM 3-4230-237-10
0008 00
MAKING STB DECONTAMINATING AGENT SLURRY - Continued
Agitating Slurry in Tank Unit - Continued
6
5
7
3. Disconnect the agitator-blender hose (5) from the blender pipe (6) on the tank unit and connect the hose to the agitator
pipe (7).
4. Open VALVE NO. 1. Agitate for a minimum of 15 minutes, operating engine at preset speed. The pump discharge
pressure gage should indicate approximately 105 psi. Continue agitating slurry until it is used.
Spraying Slurry From Tank
1. Follow operation No. 5 of the STARTING PROCEDURE instruction plate.
0008 00-6
