TM 3-4230-237-10
0008 00
MIXING CHEMICALS OTHER THAN STB IN TANK - Continued
Sodium Hydroxide - Continued
VAVALE NO.22
LVVE NO.
DECONTAMINATINGAPPARATUSM12A1
LOWERREEL
VALVE NO. 1
SERNO.
NSN
PBAUPGRADEDATE
U.S.
HEATER OFF
REATEPTACLE OFF
HECER
VVALVE NOO. 1
ALVE N.1
RECEPTACLE
ANDSWITCH
AND
MANIFOLD
ON
SWITCH ON
CAUTION
TO AVOIDFREEZE DAMAGE KEEPPUMP
DRAINVALVE OPEN WHENEQUIPMENT IS
NOT INOPERATION.
DRAIN
14
DRA-
13
OP- N
CLOSS-
CLO ED
OPE
6
5
WARNING
When disconnecting the hoses with the water temperature at or above 100 F (38 C), exercise extreme care
to prevent scalding.
CAUTION
Hot water is present in the heater and will drain when blender hose is disconnected.
4. Disconnect the blender hose (5) from water heater (13) bottom connection and connect it to the blender pipe (6) on the
tank unit.
CAUTION
Insure that the water heater is cool before stowing the main electrical power cable and fuel and water hoses
in the storage compartment.
5. Let the water heater cool before disconnecting the fuel hoses (14) from the water heater and the pump unit, then
disconnect the fuel hoses (14) and stow the fuel line, water hose, and electrical cable in the water heater storage compartment.
Cap fuel supply and return connections. Restart the pump or open VALVE NO. 1.
0008 00-11
