TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
e.
Simultaneously lower both lift cylinders to ground with hydraulic hoses attached.
f.
Reinstall pins, retainer bars, washers and bolts on both sides.
PIN, RETAINER BAR,
BOLTS AND WASHERS
LIFT CYLINDER
SCRAPER SHOWN
WARNING
Hitch and steering movement can reduce clearances suddenly and cause personnel injury. Always stop
engine BEFORE working in area of hitch link.
NOTE
If machine is not on level ground with tractor and water distributor aligned, machine may have to be reposi-
tioned to facilitate installation of hitch locking blocks.
18.
Install hitch locking blocks:
a.
Position each locking block between hitch and tractor frame.
b.
Fully tighten two bolts and jamnuts on each locking block.
0016 00-18
