TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
19.
Install all steering cylinder locking collars:
a.
Disassemble each of four locking collar assemblies, two short (6 5/8 in.) and two long (10 3/4 in.): Remove two
bolts and washers and open each short locking collar and remove hose wrapping. Remove three bolts and washers
and open each long locking collar and remove hose wrapping.
CAUTION
To prevent damage to cylinder rod, ensure rod surface is free of dirt or other debris before locking collars are
installed.
b.
Position hose wrappings and one short and one long locking collar around rod end of each steering cylinder.
c.
Install three washers and bolts to each long locking collar. Install two washers and bolts to each short locking col-
lar. Tighten bolts evenly and securely.
.
LONG LOCKING
SHORT LOCKING
COLLAR
COLLAR
TWO BOLTS
AND WASHERS
HOSE
WRAPPING
HOSE
WRAPPING
STEERING
CYLINDER
390-1033
THREE BOLTS
AND WASHERS
0016 00-20
