TM 5-3800-205-23-3
FUEL PUMP, HOSES, AND TUBES REPLACEMENT - CONTINUED
0001 00
FUEL PUMP REMOVAL
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses and tubes to aid in installation.
CAUTION
Use two wrench method when disconnecting fuel hoses to avoid damage to ceramic adapter.
1.
Disconnect hoses (1 and 4) from fuel pump (3). Remove and discard O-rings.
NOTE
Note position of fuel pump to ensure correct installation.
2.
Remove nut (7), lockwasher (8), clamp (9), and fuel pump (3) from rear of water tank. Discard lockwasher.
NOTE
Tag wires for ease in installation.
3.
Remove two nuts (5), lockwashers (6), and two wires (2) from fuel pump (3). Discard lockwashers.
2
1
4
3
5,6
9
7,8
0001 00-2
