TM 5-3800-205-23-3
FUEL PUMP, HOSES, AND TUBES REPLACEMENT - CONTINUED
0001 00
FUEL TUBES REMOVAL - CONTINUED
4.
Cut and discard tie strap (19) at front of water tank.
5.
Disconnect hose (17) from fuel return tube (14).
17
Remove and discard O-ring (18).
NOTE
While removing fuel return tube from
conduit at front of water tank, have an
assistant feed lockwire through con-
duit from rear of water tank.
Cap tube before removing.
18
(HIDDEN)
Lubricating tube with detergent may
ease removal.
6.
From front of water tank, remove fuel return tube (14)
14
from conduit (20) until lockwire exits conduit.
7.
Disconnect fuel return tube (14) from lockwire leav-
ing lockwire inside conduit (20).
19
20
FUEL TUBES INSTALLATION
1.
Securely connect fuel return tube (14) to lockwire that is inside conduit (20).
NOTE
To install tube, feed tube through conduit from front of water tank while an assistant pulls lockwire
from rear of water tank.
Cap tube before installing.
Lubricating tube with detergent may ease installation.
2.
Install fuel return tube (14) in conduit (20).
NOTE
Lubricate new O-rings with clean fuel.
3.
Install new O-ring (18) and connect hose (17) to fuel return tube (14).
0001 00-7
