TM 5-3800-205-23-3
FUEL/WATER SEPARATOR REPLACEMENT - CONTINUED
0002 00
REMOVAL - CONTINUED
3.
Clean area around fuel/water separator filter element (7) and fuel/water separator base (2). Unscrew retaining ring (8)
and remove filter element from base. Discard filter element.
4.
Disconnect hose (1) from fuel/water separator base (2). Disconnect two hoses (6) from tee (5). Install protective caps on
hoses.
5.
Remove tee (5) from fuel/water separator base (2).
6.
Remove two bolts (3), washers (4), and fuel/water separator base (2) from machine.
3,4
1
5
2
6
8
7
390-1270
7.
Remove connectors, fittings, and O-rings from fuel/water separator base (2). Discard O-rings.
INSTALLATION
1.
Coat new O-rings with clean diesel fuel and install O-rings, connectors, and fittings on fuel/water separator base (2).
2.
Install fuel/water separator base (2) on machine with two washers (4) and bolts (3).
3.
Install tee (5) on fuel/water separator base (2).
4.
Remove protective caps from hoses (1 and 6). Connect hose (1) to fuel/water separator base (2). Connect two hoses (6)
to tee (5).
NOTE
Ensure that fuel/water separator base is clean before installing filter element.
Fuel/water separator base has a locating notch that only allows for proper installation.
5.
Coat seal of new filter element (7) with clean diesel fuel and position filter element on fuel/water separator base (2).
Tighten retaining ring (8).
0002 00-2
