TM 5-3800-205-23-3
FUEL/WATER SEPARATOR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Filter element
Unit
O-rings
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 33, WP 0045 00)
Machine parked on hard, level surface (TM 5-3800-
Shop equipment, common no. 1 (Item 24, WP 0045
205-10-2)
Tank lowered to ground (TM 5-3800-205-10-2)
Materials/Parts
Parking brake engaged (TM 5-3800-205-10-2)
Cap set, protective (Item 5, WP 0044 00)
Wheels chocked (TM 5-3800-205-10-2)
Fuel, diesel (Item 13, 14 or 15, WP 0044 00)
Battery disconnect switch in OFF position (TM 5-
Rag, wiping (Item 31, WP 0044 00)
3800-205-10-2)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Clean up all leaked or spilled fuel. Fuel may ignite, causing damage to machine and injury or death
to personnel.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
REMOVAL
1.
Close two fuel shutoff valves located under each rear fender (TM 5-3800-205-10-2).
2.
Release two latches and open rear access panel at back of machine.
