TM 5-3800-205-23-3
WATER TANK INSPECTION COVER REPLACEMENT - CONTINUED
0020 00
REMOVAL - CONTINUED
2.
Inspect, remove, and discard rubber seal (7) from inspection cover (5), if damaged.
7
5
3.
Remove 12 nuts (8), lockwashers (9), bolts (10), cover flange (6), and gasket (11) from top of tank. Discard lockwashers
and gasket.
6
8,9,10
11
(HIDDEN)
INSTALLATION
1.
Install new gasket (11) and cover flange (6) on top of tank with 12 bolts (10), new lockwashers (9), and nuts (8).
2.
Install new rubber seal (7) (if required) on underside of inspection cover (5).
0020 00-2
