TM 5-3800-205-23-3
TOOLBOX REPLACEMENT - CONTINUED
0019 00
REMOVAL - CONTINUED
12,13
10
6
12,13
INSTALLATION
WARNING
Ensure that toolbox lid is supported when installing lid support, to prevent injury to personnel.
1.
If removed, install lid support (10) to toolbox (6) with four screws (13) and new locknuts (12).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
2.
With assistance, position toolbox (6) on hose reel mounting plate (11) and install six washers (9) and bolts (8).
3.
Secure step (5) to toolbox (6) with two bolts (4), four flatwashers (3), two new lockwashers (2), and nuts (1).
4.
Close toolbox lid and use padlock (7) to lock toolbox (6).
END OF WORK PACKAGE
0019 00-3
