TM 5-3800-205-23-3
TOOLBOX REPLACEMENT - CONTINUED
0019 00
REMOVAL
1.
Remove padlock (7) from toolbox (6).
2.
Open toolbox lid and lock lid in open position with lid support (10).
3.
Remove two nuts (1), lockwashers (2), four flatwashers (3), and two bolts (4) to separate step (5) from toolbox (6). Dis-
card lockwashers.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
4.
Remove six bolts (8) and washers (9) from toolbox (6) and hose reel mounting plate (11). With assistance, remove tool-
box from machine.
8,9
6
7
1,2,3,4
5
10
6
11
WARNING
Ensure that toolbox lid is supported when removing lid support, to prevent injury to personnel.
5.
If damaged, remove four locknuts (12), screws (13), and lid support (10) from toolbox (6). Discard locknuts.
0019 00-2
