TM 5-3800-205-23-3
WATER HOSE ASSEMBLIES, INLET/OUTLET PIPES, AND
MANIFOLDS REPLACEMENT - CONTINUED
0035 00
MANIFOLD PIPE REMOVAL
NOTE
Lower pipe shown removed for clarity.
1.
Remove hose reel assembly and mounting plate (WP 0030 00).
2.
Remove pressure gravity valve and gravity spray valve assemblies (WP 0027 00).
3.
Remove two nuts (15), bolts (16), coupling (17), and seal (18) from manifold pipe (19).
4.
With assistance, remove seal (18) and manifold pipe (19).
5.
Inspect seal (18) for dry rot, cracks or tears. If damaged, replace seal.
15,16
17,18 (HIDDEN)
19
COUPLING SEAL (TYPICAL)
MANIFOLD PIPE INSTALLATION
1.
With assistance, position seal (18) and manifold pipe (19) at lower spray bar.
2.
Install coupling (17) and seal (18) on manifold pipe (19) with two bolts (16) and nuts (15).
3.
Install pressure gravity valve and gravity spray valve assemblies (WP 0027 00).
4.
Install hose reel assembly and mounting plate (WP 0030 00).
0035 00-5
