TM 5-3800-205-23-3
WATER HOSE ASSEMBLIES, INLET/OUTLET PIPES, AND
MANIFOLDS REPLACEMENT - CONTINUED
0035 00
SUCTION PIPE REMOVAL
1.
Remove rear steps (WP 0018 00).
2.
Remove suction inlet manual valve (WP 0033 00).
3.
Remove pump valve assembly (WP 0027 00).
4.
Remove two nuts (32), bolts (33), coupling (34), and seal (35) from suction pipe (36) at water pump housing (24).
5.
Inspect seal (35) for dry rot, cracks or tears. If damaged, replace seal.
34,35
32,33
(HIDDEN)
24
36
NOTE
Bottom half of clamp is welded to frame.
6.
Remove two nuts (37), lockwashers (38), flatwashers (39), bolts (40), and upper half of clamp (41) from suction pipe
(36). Discard lockwashers.
7.
With assistance, remove suction pipe (36).
37,38,39,40
36
41
BOTTOM HALF OF CLAMP
WELDED TO FRAME
0035 00-9
