TM 5-3800-205-23-3
REAR WHEEL BEARINGS AND SEAL REPLACEMENT - CONTINUED
0036 00
REMOVAL - CONTINUED
4.
Remove plate (7) from axle shaft (6).
7
6
5.
Using driver and hydraulic press, remove lip seal (8) from plate (7). Discard lip seal
7
8
INSTALLATION
NOTE
Spring side of lip seal must be toward inside of plate.
1.
Using driver and press, install new lip seal (8) on plate (7) until lip seal is even with outside surface of plate.
2.
Clean and inspect seal surface on axle shaft (6). Apply a thin coat of grease on axle shaft.
3.
Install plate (7) on axle shaft (6).
0036 00-3
