TM 5-3800-205-23-3
WATER PUMP HYDRAULIC MOTOR REPLACEMENT - CONTINUED
0037 00
REMOVAL - CONTINUED
4.
Drain oil from water pump bearing housing (10) (Refer to Unit PMCS in TM 5-3800-205-23-1).
5.
Remove two bolts (12) and lockwashers (13) from support bracket (11) and frame. Discard lockwashers.
10
8,9
7
8,9
7
2
14,15
11
12,13
NOTE
Support bracket and hydraulic motor are removed as an assembly.
6.
Loosen, but do not remove, two nuts (14) and lockwashers (15) from support bracket (11).
7.
Remove four nuts (8) and lockwashers (9) securing hydraulic motor (2) to water pump bearing housing (10). Discard
lockwashers.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury or death to personnel.
NOTE
Hydraulic motor weighs 55 lb (25 kg).
8.
With assistance, slide hydraulic motor (2) off studs (7) and remove.
9.
Remove two nuts (14), lockwashers (15), and support bracket (11) from hydraulic motor (2). Discard lockwashers.
0037 00-3
