TM 5-3800-205-23-3
WATER PUMP HYDRAULIC MOTOR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Maintenance Level
Direct Support
TM 5-3800-205-23-1
Tools and Special Tools
Personnel Required
Tool kit, general mechanic's (Item 33, WP 0045 00)
Shop equipment, field automotive (Item 23, WP
Two
Equipment Condition
Materials/Parts
Cap set, protective (Item 5, WP 0044 00)
Quick disconnect hoses disconnected at top of tank
(TM 5-3800-205-10-2)
Oil, lubricating (Item 24 or 29, WP 0044 00)
Rag, wiping (Item 31, WP 0044 00)
Front of tank level (TM 5-3800-205-10-2)
Tag, marker (Item 39, WP 0044 00)
Toolbox removed (WP 0019 00)
Seal, O-ring (3)
Rear steps removed (WP 0018 00)
Washer, lock (8)
WARNING
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may result in
injury to personnel.
CAUTION
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings after dis-
connecting. Contamination of hydraulic system could result in equipment failure.
NOTE
Tag hydraulic hoses to ensure correct installation.
