TM 5-3800-205-23-3
WATER PUMP MAINTENANCE - CONTINUED
0038 00
DISASSEMBLY - CONTINUED
WARNING
Use extreme care when removing retaining ring. Failure to follow this warning may result in injury to per-
sonnel.
7.
Remove retaining ring (24).
8.
Position a hydraulic press on tip of shaft (21) and press shaft and bearing (23) from power head (2).
9.
Remove lip seal (26) from shaft (21). Discard lip seal.
10.
Remove retaining ring (25) from shaft (21).
11.
Press bearing (23) from shaft (21). Discard bearing.
12.
Remove O-ring (27) from power head (2). Discard O-ring.
2
23
24
21
27
26
25
ASSEMBLY
1.
Lubricate new O-ring (27) with oil and install on power head (2).
2.
Press new bearing (23) on shaft (21).
3.
Install retaining ring (25) on shaft (21).
4.
Lubricate new lip seal (26) and install on shaft (21), with steel side of lip seal facing out.
CAUTION
Do NOT roll lip seal when installing bearing shaft. Damage to pump may result.
5.
Install shaft (21) with bearing (23) all the way into power head (2).
6.
Install retaining ring (24).
0038 00-5
